RS-50 (For Canada & International)

Skid Steer Loader - Radial Lift

Brief Specifications
 

Operating weight:  6,065 lb / 2751 kg


Tipping load: 3,300 lbs / 1497 kg


Breakout force: 4,750 lb / 2154 kg


Gross engine power: 50 hp / 37.3 kW
 

 

⇒ Download RS-50 Spec Sheet

⇒ Request a Quote

 

  • Loader arms Radial

    Operating weight 6,065 lbs | 2751 kg

    Shipping weight 5,331 lbs | 2418 kg

    Operating capacity, 50% of tipping load 1,650 lbs | 748 kg

    Tipping load 3,300 lbs | 1497 kg

    Travel speed, maximum - 1st speed 7.4 mph | 11.9 kph

    Travel speed, maximum - 2nd Speed (optional) 12 mph | 19.3 kph

    Breakout force at bucket edge 4,750 lbs | 2154 kg

    Arm lifting force 4,750 lbs | 2154 kg

    Ground clearance, unloaded 10.5 in. | 267 mm 

    Ground clearance, loaded 10 in. | 254 mm

    Width over tires 66 in. | 1676 mm

    Width over tires with rims reversed 60 in. | 1524 mm

  • Type Diesel, 4-cylinder, naturally-aspirated

    Model Perkins 404D-22

    Displacement 135 in3 | 2.2 L

    Gross power rating @ 2800 rpm 50 hp | 37.3 kW

    Torque, peak 105 ft-lb | 143 Nm

    Cooling system Engine-driven fan and coolant/ anti-freeze-filled radiator

    Intake air cleaner Dual stage

    Emission controls Meets all U.S. EPA Tier 4 final standards

  • Drive system Hydrostatic

    Chain case Bow tie drive system

    Chain size 80 ANSI chain

    Wheel size 10x16.5

    Tractive effort 8,453 lbs | 3826 kg

  • Pump capacity 17.1 gpm | 65 lpm

    System pressure, max. 3,335 psi | 230 bar

    Controls Intermittent via joystick button or continuous via console switch, mode selectable via dash-mounted switch

    Couplers Push-to-connect quick couplers mounted on loader arms Pressure relief valve mounted to coupler block

    Cooling system High efficiency side-by-side radiator and oil cooler

  • Nominal charge 12 V Battery 770 CCA

    Charging system 65 amp alternator

    Outlets 1-12 V port inside operator station

    Engine Block Heater Standard

    Wiring Pre-wired for all factory-available accessories

  • Seat: Adjustable contour vinyl with built-in operator presence switch, lap bar and 2 in | 51 mm wide seat belt

    Loader control: Right-hand pilot hydraulic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic

    Drive control: Left-hand pilot hydraulic joystick controls machine speed and direction

    Engine speed Foot throttle

    Indicators & gauges Engine oil low-pressure light Hydraulic oil high-temperature light Engine high-temperature light Low battery voltage light Tachometer, hour meter, fuel gauge Two speed

    ROPS / FOPS Meets ISO 3471, ISO 6683, ISO 3449:2005 Level 1

    Illumination 2 - Fixed forward-facing halogen lights 2 - Adjustable rear-facing halogen light 1 - Interior light

    Convenience 12 V power port

    Horn

    Backup alarm

    Sound insulation

    Rear window

RS-50 (For Canada & International)

Skid Steer Loader - Radial Lift

Brief Specifications
 

Operating weight:  6,065 lb / 2751 kg


Tipping load: 3,300 lbs / 1497 kg


Breakout force: 4,750 lb / 2154 kg


Gross engine power: 50 hp / 37.3 kW
 

 

⇒ Download RS-50 Spec Sheet

⇒ Request a Quote

 

  • Loader arms Radial

    Operating weight 6,065 lbs | 2751 kg

    Shipping weight 5,331 lbs | 2418 kg

    Operating capacity, 50% of tipping load 1,650 lbs | 748 kg

    Tipping load 3,300 lbs | 1497 kg

    Travel speed, maximum - 1st speed 7.4 mph | 11.9 kph

    Travel speed, maximum - 2nd Speed (optional) 12 mph | 19.3 kph

    Breakout force at bucket edge 4,750 lbs | 2154 kg

    Arm lifting force 4,750 lbs | 2154 kg

    Ground clearance, unloaded 10.5 in. | 267 mm 

    Ground clearance, loaded 10 in. | 254 mm

    Width over tires 66 in. | 1676 mm

    Width over tires with rims reversed 60 in. | 1524 mm

  • Type Diesel, 4-cylinder, naturally-aspirated

    Model Perkins 404D-22

    Displacement 135 in3 | 2.2 L

    Gross power rating @ 2800 rpm 50 hp | 37.3 kW

    Torque, peak 105 ft-lb | 143 Nm

    Cooling system Engine-driven fan and coolant/ anti-freeze-filled radiator

    Intake air cleaner Dual stage

    Emission controls Meets all U.S. EPA Tier 4 final standards

  • Drive system Hydrostatic

    Chain case Bow tie drive system

    Chain size 80 ANSI chain

    Wheel size 10x16.5

    Tractive effort 8,453 lbs | 3826 kg

  • Pump capacity 17.1 gpm | 65 lpm

    System pressure, max. 3,335 psi | 230 bar

    Controls Intermittent via joystick button or continuous via console switch, mode selectable via dash-mounted switch

    Couplers Push-to-connect quick couplers mounted on loader arms Pressure relief valve mounted to coupler block

    Cooling system High efficiency side-by-side radiator and oil cooler

  • Nominal charge 12 V Battery 770 CCA

    Charging system 65 amp alternator

    Outlets 1-12 V port inside operator station

    Engine Block Heater Standard

    Wiring Pre-wired for all factory-available accessories

  • Seat: Adjustable contour vinyl with built-in operator presence switch, lap bar and 2 in | 51 mm wide seat belt

    Loader control: Right-hand pilot hydraulic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic

    Drive control: Left-hand pilot hydraulic joystick controls machine speed and direction

    Engine speed Foot throttle

    Indicators & gauges Engine oil low-pressure light Hydraulic oil high-temperature light Engine high-temperature light Low battery voltage light Tachometer, hour meter, fuel gauge Two speed

    ROPS / FOPS Meets ISO 3471, ISO 6683, ISO 3449:2005 Level 1

    Illumination 2 - Fixed forward-facing halogen lights 2 - Adjustable rear-facing halogen light 1 - Interior light

    Convenience 12 V power port

    Horn

    Backup alarm

    Sound insulation

    Rear window